Low to medium height,
directional, solar street lighting.

'SolarStreet' Solar Street Lighting

SolarStreet solar LED light poles offer an affordable lighting solution for pathways, roadways and public spaces, especially in more remote locations where access to mains power may not be economically viable. Being lower than a normal street light, these poles are ideal for providing a more precisely focused light on roadways, footpaths, walkways, parking lots, housing developments, commercial premises and other large public spaces.

Available in three heights - 6’6”, 9’10”, 13’1” - the poles can be equipped with an infrared sensor which temporarily raises the brightness on approach, reverting to a lower light level after 10 sec.

High performance at zero cost

SolarStreet PV solar cells are located on the sides of the posts, providing an exceptional power generating capacity without the need for visually intrusive, flat panel solar arrays.

Download datasheet

7 x 4.3W solar panels per post – 30.1 W total output

With an area of 316 sq. in., the unobtrusive solar cells generate sufficient power for illuminating the signage for many days.

Days of light output, not hours

SolarStreet lights are guaranteed to work from dusk until dawn, providing high performance white LED 180 lumens per watt night lighting for up to 14 days without daylight.

Extended battery life

Batteries can last up to 10 years and can be disabled when not in use.

Intelligent control

The intelligent management system of SolarStreet street lights optimizes solar generating performance in real time according to local conditions.

SolarStreet can provide lighting night after night for up to 14 days, without needing bright sunlight for re-charging.

Download datasheet

Maximizing power generation

The SolarStreet control system uses an algorithm to maximize the power generated from each solar panel. The optimum power point of the panels is calculated in real time to capture energy efficiently and harvest the maximum power from each panel.

Battery management

Battery management technology mitigates full discharge by reducing the LED brightness until there is sufficient ambient light to charge.

Sensors trigger LED to brighten on approach

The SolarStreet control system monitors ambient light levels. During the night, a high efficiency 180 lumens-per-watt white LED illuminates. The brightness of the LED is set at a lower light level until activated by infrared sensors. On approach the LED brightens for 10 seconds, gently dimming back to the low level.

Fast & cost saving installation

With SolarStreet solar lighting, there's no need to worry about the proximity to mains power supply. Set these outdoor solar post lights in place anywhere - along remote pathways, in housing estates, around public plazas, in parks and recreation areas.

Download datasheet

No trenching costs

Trenching for electrical wires along a pathway can quickly become expensive. This cost can escalate rapidly if other challenges arise like rocky terrain.

No site disruption and remediation work

Any trenching means disruption of the site, access restriction and the cost of subsequent ground remediation, vegetation replacement and landscaping works. With SolarStreet lighting poles, only individual footings need to be installed.

Faster Installation

With less work in site preparation, electrical connections and site remediation, SolarStreet light poles can be installed in just a fraction of the time compared with mains powered light poles.

Elegant, simple design

With the large capacity solar cells skillfully incorporated in square aluminum posts, Solarstreet solar lighting poles avoid visually intrusive solar panels and battery boxes.

The sleek, square, powder coated aluminum posts are totally self-contained and include all components necessary for stand-alone installation.

Download datasheet

Dust proof, watertight enclosures

Solarstreet enclosures are rated as IP66 according to international standard EN 60529 - 'dust tight' and protected against heavy seas or powerful jets of water.

Vandal resistant solar cells

Photovoltaic cells are sealed behind UV stabilized tempered glass and being at the sides on the poles rather than at the top, are less exposed to potential damage.

Solar panels
Power: 30.1W (7 x 4.3W panels)
Construction: PV cells sealed behind UV stabilized tempered glass.
Total area: 316 sq.in.
Type: Ni-MH
Capacity: 6V 10Ah
Lifetime: up to 10 years at 68°F
Operating temp.: -40°F to +185°F
Color temp.: 3700K to 5000K
Max. current: 520mA
Max LED power: 1.43W - 180 lumens per watt
Angle of light beam: 71°
Proximity Sensor
Type: Passive infrared
Detection range: up to 16’
Detection angle: 120°
Cap and lid: Die-cast aluminum
Post and chassis: Extruded aluminum
Finish: Powder coated
IP rating: 66 (ingress protection)