×

'SolarPost 100' Bollard Lights

SolarPost 100 bollards provide low-level, directionally focused lighting and delineation, increasing  safety and security along pathways and sidewalks as well as public spaces such as plazas, playgrounds and parks.  

Their low height minimizes visual clutter compared with taller pole mounted lighting while their low glare, downward focused light enhances the nighttime ambiance in public spaces.  

Intelligent control & operation

The intelligent management system of SolarPost 100 bollard lights optimizes solar generating performance in real-time according to local conditions.

Bollards can thus provide lighting night after night for up to 14 days, without needing bright sunlight for re-charging.

Download datasheet

Maximizing power generation

The SolarPost 100 control system uses an algorithm to maximize the power generated from each solar panel. The optimum power point of the panels is calculated in real time to capture energy efficiently and harvest the maximum power from each panel.

Battery management

Battery management technology mitigates full discharge by reducing the LED brightness until there is sufficient ambient light to charge.

Sensors trigger LED to brighten on approach

The SolarPost 100 control system monitors ambient light levels. During the night, a high efficiency 180 lumens-per-watt white LED illuminates. The brightness of the LED is set at a reduced light level until activated by infrared sensors. On approach the LED brightens for 10 seconds, gently dimming to the lower level.

Minimized light pollution

The combination of proximity sensors and the design of the light fittings ensures light is directed only where needed with variable output depending on the pedestrian traffic.

Fast & cost saving installation

With SolarPost 100 bollard lights, you don’t have to worry about the proximity to mains power supply. Set these outdoor solar post lights anywhere you like, along remote pathways, laneways, parks and recreation areas.

With no trenching and remedial work needed, the cost of installation is only a fraction of mains powered bollard lighting.

Even the cost of these commercial quality bollard lights is significantly less than many mains powered bollards.
  • No trenching costs

    Trenching for electrical wires along a pathway can quickly become expensive. And costs can escalate rapidly if other challenges arise like rocky terrain or the need to navigate around gas, water, phone or electrical services.

  • No site disruption and remediation work

    Any trenching means disruption of the site, access restriction and the cost of subsequent ground remediation, vegetation replacement and landscaping works. With Solarpost 100 bollards, only individual footings need to be installed, or simply bolt to an existing concrete slab.

  • Faster Installation

    With less work in site preparation, electrical connections and site remediation, SolarPost 100 bollards can be installed in just a fraction of the time compared with mains powered bollards.

  • Optional mounting configurations

    SolarPost 100 bollards can be either surface mounted on a concrete slab or attached to a buried precast base. Unlike steel bollards or bollards with steel bases, SolarPost 100 bollards will not rust or corrode over time.

SolarPost 100 bollard lights are designed to look like regular lighted bollards, avoiding the use of large solar panels and battery boxes located separately from the fixture itself.

The sleek, square, powder coated aluminum posts are totally self-contained and include all components necessary for stand-alone installation.

Dust proof, watertight enclosures

SolarPost enclosures are rated as IP66 according to international standard EN 60529 - "dust tight" and protected against heavy seas or powerful jets of water.

Side mounted, vandal resistant solar cells

Photovoltaic cells are sealed behind UV stabilized tempered glass and being at the sides on the poles rather than at the top, are less exposed to potential damage..

Elegant, simple design

High performance at zero cost

Unlike most solar bollard lights which rely on a single, small round or square solar cell on the top of the post, the PV cells in these commercial quality Solarpost 100 bollard lights are located on the sides of the posts.

This achieves a vastly higher power generating capacity with significantly greater light output and a service time of days, not hours.
  • 4 solar panels per post - 17.2 W total output

    With an area of 158 sq. in., the SolarPost 100 panels generate more than twice the power of competitive commercial grade, solar powered LED bollards.

  • Extended battery life

    Batteries can last up to 10 years and can be disabled when not in use.

  • Days of light output, not hours

    SolarPost 100 bollards are guaranteed to work from dusk until dawn and can provide light for up to 14 days without daylight with high performance white LED 180 lighting.

Download datasheet

Specifications

Color Options
Silver
Silver with graphite grey cap.
Ground Fixing Options
Dimensions
Solar panels
Solar panels
Power: 17.2W (4 x 4.3W panels)
Construction: PV cells sealed behind UV stabilized tempered glass.
Total area: 158 sq. in.
Battery
Battery
Type: Ni-MH
Capacity: 6V 10Ah
Lifetime: Up to 10 years at 68°F
Operating temp.: -40°F to +185°F
LED
LED
Color temp.: 3700K to 5000K
Max. current: 520mA
Max LED power: 1.43W - 180 lumens per watt
Proximity Sensor
Proximity Sensor
Type: Passive infrared
Detection range: Up to 16’
Detection angle: 120°
Materials
Materials
Cap and lid: Die-cast aluminum
Post and chassis: Extruded aluminum
Finish: Powder coated
IP rating: 66 (ingress protection)
Warranty: 4 years